Electrolux ESS67300SW, User Manual

spotting on the items. Using too much

detergent with soft or softened water

results in detergent residues on the

dishes. Adjust the amount of

detergent based on the water

hardness. Refer to the instructions on

the detergent packaging.

• Always use the correct quantity of

rinse aid. Insufficient dosage of rinse

aid decreases the drying results.

Using too much rinse aid results in

bluish layers on the items.

• Make sure that the water softener

level is correct. If the level is too high,

the increased quantity of salt in the

water might result in rust on cutlery.

10.3 What to do if you want to

stop using multi-tablets

Before you start to use separately

detergent, salt and rinse aid, complete

the following steps:

1. Set the highest level of the water

softener.

2. Make sure that the salt and rinse aid

containers are full.

3. Start the shortest programme with a

rinsing phase. Do not add detergent

and do put dishes in the baskets.

4. When the programme is complete,

adjust the water softener according

to the water hardness in your area.

5. Adjust the released quantity of rinse

aid.

6. Activate the rinse aid empty

notification.

10.4 Loading the baskets

• Always use the whole space of the

baskets.

• Use the appliance to wash

dishwasher-safe items only.

• Do not wash the following materials in

the dishwasher: wood, horn, pewter,

copper, aluminium, delicate

ornamented porcelain and

unprotected carbon steel. This can

cause them to crack, warp, discolour,

pit or rust.

• Do not wash in the appliance items

that can absorb water (sponges,

household cloths).

• Put hollow items (cups, glasses and

pans) with the opening facing

downwards.

• Make sure that glasses do not touch

each other.

• Put light or plastic items in the upper

basket. Make sure that the items do

not move freely.

• Put cutlery and small items in the

cutlery basket.

• Make sure that the spray arms can

move freely before you start a

programme.

10.5 Before starting a

programme

Before you start the selected

programme, make sure that:
• The filters are clean and correctly

installed.

• The cap of the salt container is tight.

• The spray arms are not clogged.

• There is enough salt and rinse aid

(unless you use multi-tablets).

• The arrangement of the items in the

baskets is correct.

• The programme is suitable to the type

of load and the degree of soil.

• The correct quantity of detergent is

used.

10.6 Unloading the baskets

1. Let the tableware cool down before

you remove it from the appliance. Hot

items can be easily damaged.

2. First remove items from the lower

basket, then from the upper basket.

After the programme is

completed, water can still

remain on the inside

surfaces of the appliance.

www.electrolux.com

18