Electrolux ESS67300SW, User Manual

5.1 Consumption values

Programme 1) 2)

Water

(l)

Energy

(kWh)

Duration

(min)

10.5

0.835

235

9.6 - 13.1

0.74 - 1.06

120 - 170

13.9 - 16.9

1.14 - 1.40

204

10.8 - 13.2

0.97 - 1.11

160

9.3 - 11.4

0.54 - 0.66

30

8.9 - 10.9

0.58 - 0.70

60

1) The pressure and the temperature of the water, the variations of the mains supply, the

options, the quantity of dishes and the degree of soil can change the values.

2) The values for programmes other than ECO are indicative only.

5.2 Information for test

institutes

To receive the necessary information for

conducting performance tests (e.g.

according to: EN60436 ), send an email

to:
info.test@dishwasher-production.com

In your request, include the product

number code (PNC) from the rating plate.
For any other questions regarding your

dishwasher, refer to the service book

provided with your appliance.

6. SETTINGS

6.1 Programme selection mode

and user mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter user mode.
Settings available in the user mode:

• The level of water softener according

to the water hardness.

• Activation or deactivation of the rinse

aid empty notification.

• The level of rinse aid according to the

required dosage.

• Activation or deactivation of the

AirDry.

As the appliance stores the saved

settings, there is no need to configure

it before every cycle.

How to set the programme

selection mode

The appliance is in programme selection

mode when the programme indicator

 is on and the display shows the

programme duration.
After activation, the appliance is in

programme selection mode by default. If

not, set the programme selection mode

the following way:

Press and hold simultaneously Delay

and Options until the appliance is in

programme selection mode.

How to enter user mode

Make sure the appliance is in

programme selection mode.

ENGLISH

9