Electrolux ESZ89300UW, User Manual

How to set the programme

selection mode

The appliance is in programme selection

mode when the display shows the

programme number P1.
After activation, the appliance is in

programme selection mode by default. If

not, set the programme selection mode

the following way:

Press and hold simultaneously   and

 until the appliance is in programme

selection mode.

How to enter user mode

Make sure the appliance is in

programme selection mode.

To enter user mode, press and hold
simultaneously   and   until the

indicators 

,  , ,   and 

 flash

and the display is blank.

6.2 The water softener

The water softener removes minerals

from the water supply, which would have

a negative effect on the washing results

and on the appliance.
The higher the content of these minerals,

the harder your water is. Water hardness

is measured in equivalent scales.
The water softener should be adjusted

according to the hardness of the water in

your area. Your local water authority can

advise you on the hardness of the water

in your area. Set the right level of the

water softener to assure good washing

results.

Water hardness

German de‐

grees (°dH)

French de‐

grees (°fH)

mmol/l

Clarke de‐

grees

Water softener

level

47 - 50

84 - 90

8.4 - 9.0

58 - 63

10

43 - 46

76 - 83

7.6 - 8.3

53 - 57

9

37 - 42

65 - 75

6.5 - 7.5

46 - 52

8

29 - 36

51 - 64

5.1 - 6.4

36 - 45

7

23 - 28

40 - 50

4.0 - 5.0

28 - 35

6

19 - 22

33 - 39

3.3 - 3.9

23 - 27

5 1)

15 - 18

26 - 32

2.6 - 3.2

18 - 22

4

11 - 14

19 - 25

1.9 - 2.5

13 - 17

3

4 - 10

7 - 18

0.7 - 1.8

5 - 12

2

<4

<7

<0.7

< 5

1 2)

1) Factory setting.

2) Do not use salt at this level.

Regardless of the type of detergent

used, set the proper water hardness

level to keep the salt refill indicator

active.

Multi-tabs containing salt are

not effective enough to

soften hard water.

www.electrolux.com

10