6
Your compactor has four adjustable levelers; () rollers in
the rear and () legs in the front. They allow you to adjust
for uneven floors and also trim the unit up to fit an under-
counter installation.
to level the back of the compactor:
Tip the back of compactor up and onto a wood block.
Loosen the adjusting screws only far enough to move the
rollers to a higher or lower slot. Retighten the adjusting
screws and remove the wood block.
to level the front of the compactor:
Tip the front of compactor up and onto a wood block.
Turn the leveling legs in or out to the desired position.
Remove the wood block.
Installation
BACK OF
COMPACTOR
WOOD
BLOCK
ADjUSTING
SCREWS
SLOTS
ROLLERS
FRONT OF
COMPACTOR
WOOD
BLOCK
LEVELING
LEGS
Leveling the Compactor
