Electrolux EU 7120 C, Instruction Book

5

OPERATION

Before using

Remove all securing tapes. Wash inside the

appliance with lukewarm water and bicarbonate of

soda (5 ml to 0.5 litre of water). 

Do not use soap or detergent as the smell may

linger. Dry thoroughly.

Control Panel

min

MAX

C

A

B

D E

ALARM

SUPER

ON

N S

A -

Fast freeze knob

B -

Thermostat control

C -

Operation light

D -

Fast freeze light

E -

Alarm light

Start your appliance

Insert the plug into the wall socket. The pilot light (C)

will light up to show that the appliance is on.

Temperature control

The temperature within the freezer is controlled by

the thermostat situated at the top of the cabinet.
To operate the freezer proceed as follows:
Turn the thermostat control beyond the Ç

■

È position.

When you first start the freezer, we suggest that you

turn the thermostat control to a medium setting. 
For easier turning of this control, use a small

coin.The internal temperature of the freezer is

automatically adjusted by the thermostat to ensure

safe food storage. 
However, if the appliance is working in unfavourable

room conditions such as
- poor 

ventilation, 

- high temperature, 
- frequent door openings, 
it may be necessary to select a more suitable

setting.
To obtain a lower temperature, turn the thermostat

control towards max; to obtain a higher temperature

turn the control towards min.

Control Panel

A. Fast freeze knob

When you place fresh food in the appliance, turn the

fast freeze knob to ÒSÓ.

B. Thermostat control

When you first start the freezer we suggest that you

turn the thermostat to a medium setting by using a

coin that fits the groove.
Min = lowest setting, minimum cold
Max = highest setting, maximum cold

C. Operation light

The operation light is illuminated continuously, to

show that the appliance is on.

D. Fast freeze light

The fast freeze light is illuminated, to show that the

fast freeze function is working.

E. Alarm light

If the alarm light (E) lights up, it indicates that the

temperature within the freezer has reached a level

where the safe food storage is no longer ensured.
When the freezer is first switched on, the alarm light

will stay on until the temperature has dropped to a

safe level for the storage of frozen food.

Freezing fresh food

In any 24 hour period you can freeze up to 22 kg of

fresh food.
When you first start the freezer or after a period of

non-use, turn the  fast freeze knob  to ÇSÈ 24 hours

before you want to freeze your food (the yellow light

(D) lights up).
If the freezer is already in operation, the fast-freeze

knob should be activated about 2-3 hours before

freezing fresh food. 

16

Electrical connections

Any electrical work required to install this appliance

should be carried out by a qualified electrician or

competent person.

WARNING: THIS APPLIANCE MUST BE

EARTHED.
The manufacturer declines any liability should

this safety measure not be observed.

If the plug that is fitted to your appliance is not

suitable for your socket outlet, it must be cut off and

the appropriate plug fitted.
Remove the fuse from the cut off plug. 
The cut off plug should then be disposed of to

prevent the hazard of shocks in case it should be

plugged into a 13amp socket in another part of your

home.

Important

The wires in the mains lead are coloured in

accordance with the following code:

Green and Yellow        - Earth
Blue                              - Neutral
Brown                           - Live

If you fit your own plug, the colours of the wires in

the mains lead of your appliance may not

correspond with the markings identifying the

terminals in your plug, proceed as follows:

Connect the Green and Yellow (earth) wire to the

terminal in the plug which is marked with the letter
ÇEÈ or the earth symbol 

or coloured green and

yellow.
Connect the blue (neutral) wire to the terminal in the

plug which is marked with the letter ÇNÈ or coloured

black.
Connect the brown (live) wire to the terminal in the

plug which is marked with the letter ÇLÈ or coloured

red.

D207

GREEN & YELLOW

13 AMP. FUSE

BROWN

CORD CLAMP

BLUE

13 AMP

The plug moulded onto the lead incorporates a fuse.

For replacement, use a 13amp BSI362 fuse. Only

ASTA or BSI approved fuses should be used.
The plug must not be used if the fuse cover/carrier is

lost. The cover/carrier is indicated by the coloured

insert at the base of the plug.
A replacement cover/carrier must be obtained from

your local Electrolux Service Force Centre.

This appliance complies with the E.E.C. Directive

No. 87/308 of 2.6.87 relative to radio interference

suppression.

This appliance complies with the following

E.E.C. Directives:

- 

73/23 EEC of 19.2.73

(Low Voltage Directive)

and subsequent modifications;

- 

89/336 EEC of 3.5.89 

(Electromagnetic

Compatibility Directive) and subsequent

modifications.

Please ensure that when the appliance is

installed it is easily accessible for the engineer in

the event of a breakdown.