5. Unscrew the lower hinge. Change the
position of the pin and buffert. Screw
the lower hinge on the opposite side.
6. Tighten the pin with the adjustment
spanner supplied.
7. Raise the appliance and install the venti-
lation grille.
8. Unscrew the handle. On the opposite
side remove the hole covers by driving a
3-4 mm drift or drill into them. Install the
handle.
Install the hole covers provided within
the accessory bag.
9. Put the cabinet in position.
Warning!
Reposition, level the
appliance, wait for at least four hours
and then connect it to the power
socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabi-
net.
• The door opens and closes correctly.
Warning!
If the ambient temperature is
cold (i.e. in Winter), the gasket may not
fit perfectly to the cabinet. In that case,
wait for the natural fitting of the gasket.
ENVIRONMENTAL CONCERNS
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
12
electrolux
Summary of Contents for EUC25220W
Page 1: ...user manual Freezer EUC25220W EUC29220W ...
Page 13: ...electrolux 13 ...
Page 14: ...14 electrolux ...
Page 15: ...electrolux 15 ...