background image

• It is dangerous to alter the specifications or

modify this product in any way. Any dam-
age to the cord may cause a short-circuit,
fire and/or electric shock.

Warning!

 Any electrical component

(power cord, plug, compressor) must be
replaced by a certified service agent or
qualified service personnel.

1. Power cord must not be lengthened.
2. Make sure that the power plug is not

squashed or damaged by the back of
the appliance. A squashed or dam-
aged power plug may overheat and
cause a fire.

3. Make sure that you can come to the

mains plug of the appliance.

4. Do not pull the mains cable.
5. If the power plug socket is loose, do

not insert the power plug. There is a
risk of electric shock or fire.

6. You must not operate the appliance

without the lamp cover

1)

 of interior

lighting.

• This appliance is heavy. Care should be

taken when moving it.

• Do not remove nor touch items from the

freezer compartment if your hands are
damp/wet, as this could cause skin abra-
sions or frost/freezer burns.

• Avoid prolonged exposure of the appli-

ance to direct sunlight.

Daily Use

• Do not put hot pot on the plastic parts in

the appliance.

• Do not store flammable gas and liquid in

the appliance, because they may explode.

• Do not place food products directly

against the air outlet on the rear wall.

2)

• Frozen food must not be re-frozen once it

has been thawed out.

• Store pre-packed frozen food in accord-

ance with the frozen food manufacturer's
instructions.

• Appliance's manufacturers storage rec-

ommendations should be strictly adhered
to. Refer to relevant instructions.

• Do not place carbonated or fizzy drinks in

the freezer compartment as it creates

pressure on the container, which may
cause it to explode, resulting in damage to
the appliance.

• Ice lollies can cause frost burns if con-

sumed straight from the appliance.

Care and cleaning

• Before maintenance, switch off the appli-

ance and disconnect the mains plug from
the mains socket.

• Do not clean the appliance with metal ob-

jects.

• Do not use sharp objects to remove frost

from the appliance. Use a plastic scraper.

• Never use a hair drier or other heating ap-

pliances to speed up defrosting. Excessive
heat may damage the plastic interior, and
humidity could enter the electric system
making it live.

Installation

Important!

 For electrical connection

carefully follow the instructions given in
specific paragraphs.

• Unpack the appliance and check if there

are damages on it. Do not connect the ap-
pliance if it is damaged. Report possible
damages immediately to the place you
bought it. In that case retain packing.

• It is advisable to wait at least four hours

before connecting the appliance to allow
the oil to flow back in the compressor.

• Adequate air circulation should be around

the appliance, lacking this leads to over-
heating. To achieve sufficient ventilation
follow the instructions relevant to installa-
tion.

• Wherever possible the back of the product

should be against a wall to avoid touching
or catching warm parts (compressor, con-
denser) to prevent possible burn.

• The appliance must not be located close

to radiators or cookers.

• Make sure that the mains plug is accessi-

ble after the installation of the appliance.

• Connect to potable water supply only.

3)

1) If the lamp cover is foreseen
2) If the appliance is Frost Free
3) If a water connection is foreseen

electrolux 

 3

Summary of Contents for EUC31305W

















Reviews: