Electrolux EUF10810, User Manual

• Connect to potable water supply only. 

8)

Service

• Any electrical work required to do the

servicing of the appliance should be car-
ried out by a qualified electrician or com-
petent person.

• This product must be serviced by an au-

thorized Service Centre, and only genu-
ine spare parts must be used.

Environment Protection

This appliance does not contain gasses
which could damage the ozone layer,

in either its refrigerant circuit or insula-
tion materials. The appliance shall not
be discarded together with the urban
refuse and rubbish. The insulation foam
contains flammable gases: the appli-
ance shall be disposed according to
the applicable regulations to obtain
from your local authorities. Avoid dam-
aging the cooling unit, especially at the
rear near the heat exchanger. The ma-
terials used on this appliance marked
by the symbol 

 are recyclable.

CONTROL PANEL

1

2

3

4

5

1

Pilot light

2

Temperature regulator

3

Fast Freeze light

4

Fast Freeze switch
Acoustic alarm reset switch

5

Alarm light

Switching on

1. Insert the plug into the wall socket.
2. Turn the Temperature regulator clock-

wise to a medium setting.

3. The Pilot light will light up and a sound

is on only for 2 sec. indicating that the
appliance is powered.

4. The Alarm light will blink and the sound

signal alarm will get on, indicating that
the temperature inside the appliance is
too high.

5. Push the Fast Freeze switch and the

sound signal alarm will get off.

6. Push the Fast Freeze switch once

again and the Fast Freeze light will light
up. The freezer will start to operate.

Switching off

1. To turn off the appliance, turn the Tem-

perature regulator to the "O" position
and a sound is on only for 2 sec.

2. The pilot light will switch off.

Temperature regulation

The temperature within the appliance is
controlled by the Temperature regulator sit-
uated at the bottom of the cabinet.
To operate the appliance, proceed as fol-
lows:
• turn the Temperature regulator toward

lower settings to obtain the minimum
coldness.

• turn the Temperature regulator toward

higher settings to obtain the maximum
coldness.

A medium setting is generally the most
suitable.

However, the exact setting should be chos-
en keeping in mind that the temperature in-
side the appliance depends on:
• room temperature
• how often the door is opened

8) If a water connection is foreseen.

14 

electrolux