Electrolux EUF14810, User Manual

1. Connect the wire coloured green and

yellow to the terminal marked either with
the letter “E“ or by the earth symbol 
or coloured green and yellow.

2. Connect the wire coloured blue to the

terminal either marked with the letter
“N“ or coloured black.

3. Connect the wire coloured brown to the

terminal either marked with the “L“ or
coloured red.

4. Check that no cut, or stray strands of

wire is present and the cord clamp 

4

 is

secure over the outer sheath.

5. Make sure the electricity supply voltage

is the same as that indicated on the ap-
pliance rating plate.

6. Switch on the appliance.
The appliance is supplied with a 13 amp
plug fitted 

2

 . In the event of having to

change the fuse in the plug supplied, a 13
amp ASTA approved (BS 1362) fuse must
be used.

Warning!

 A cut off plug inserted into a

13 amp socket is a serious safety
(shock) hazard. Ensure that it is
disposed of safely.

Door reversibility

The door of the appliance opens to the
right. If you want to open the door to the
left, follow these steps before you install the
appliance:
1. Loosen and remove the upper pin.
2. Remove the door.
3. Remove the spacer.
4. With a key, loosen the lower pin.

On the opposite side:

1. Tighten the lower pin.
2. Install the spacer.
3. Install the door.
4. Tighten the upper pin.

Ventilation requirements

The airflow behind the appliance must be
sufficient.

min.

200 cm

2

min.

200 cm

2

Installing the appliance

Caution!

 Make sure that the mains

cable can move freely.

Do the following steps:

10 

electrolux