Electrolux EUF2540MHW, User Manual

Problem

Possible cause

Solution

The compressor operates

continually.

Temperature is set incor‐

rectly.

Refer to "Operation" chapter.

Many food products were

put in at the same time.

Wait some hours and then

check the temperature

again.

The room temperature is

too high.

Refer to climate class chart

on the rating plate.

Food products placed in

the appliance were too

warm.

Allow food products to cool

to room temperature before

storing.

The door is not closed

correctly.

Refer to "Closing the door".

The ActionFreeze func‐

tion is switched on.

Refer to "ActionFreeze func‐

tion".

The compressor does not

start immediately after

pressing the ActionFreeze,

or after changing the tem‐

perature.

This is normal, no error

has occurred.

The compressor starts after

a period of time.

Water flows on the floor.

The melting water outlet

is not connected to the

evaporative tray above

the compressor.

Attach the melting water out‐

let to the evaporative tray.

Temperature cannot be

set.

The ActionFreeze func‐

tion is switched on.

Switch off ActionFreeze

manually, or wait until the

function resets automatically

to set the temperature. Refer

to "ActionFreeze function".

Door is misaligned or inter‐

feres with ventilation grill.

The appliance is not lev‐

elled.

Refer to "Levelling".

The temperature in the ap‐

pliance is too low/too high.

The temperature regula‐

tor is not set correctly.

Set a higher/lower tempera‐

ture.

Food products placed in

the appliance were too

warm.

Allow food products to cool

to room temperature before

storing.

The door has been

opened often.

Open the door only if neces‐

sary.

The ActionFreeze func‐

tion is switched on.

Refer to "ActionFreeze func‐

tion".

There is no cold air circu‐

lation in the appliance.

Make sure that there is cold

air circulation in the appli‐

ance.

ENGLISH

11