8
First switch on
After plugging the plug into the power
outlet, if the display is not illuminated,
press key (A), appliance on.
As soon as the appliance is turned on,
it is in alarm condition, the temperatur
e
flashes and you will hear a buzzer.
Press key (E) and the buzzer will go off
(also see the section on "excessive
temperature alarm") the icon
still
flashes and on the indicator
will
appear the warmest temperature
reached.
For a correct storage of the food select
the Eco mode function that guarantee
the following temperature is set:
-18°C in the freezer
·
Wait until the inside compartment
temperature reach -18°C, before intro-
ducing the goods in the freezer com-
partment.
·
To select a different temperature
see "Temperature regulation".
Functions Menu
By activating the key D the functions
menu is operating. Each function
could be confirmed by pressing button
E. If there is no confirmation after
some seconds the display will go out
from the menu and return in normal
condi-tion.
The following functions are indicated:
Ambient Temperature
Child lock function
Eco mode function
Fast freeze function
Chill mode function (or timer function)
Select /Switch off /Switch on
Temperature selection
The temperature may be regulated by
pressing the key (B) to set the desired
temperature.
By pressing the key (B) the current
temperature setting flashes on the
indicator. To confirm the choice of the
temperature press the key (E).
You will hear the buzzer for few
seconds and the indicator displays the
newly selected temperature for a few
seconds, then shows again the inside
compartment temperature.
The newly selected-temperature must
be reached after 24 hours.
After a long period out of use it is not
necessary to set again the temperature
because it remains stored.
Attention!
During the stability period by the first
starting the temperature displayed can
not correspond to the setting tempe-
rature. During this time it is possible
that the temperature displayed is
different than the setting temperature.
Switching off
The appliance is shut off by pressing
key (A) for more than 1 second. After
this, a countdown of the temperature
from -3 -2 -1 will be shown.
