background image

At the end of the selected time there are the

following indications:

• on the indicator 

 the symbol   flashing

• the icon 

 flashing

• the icon   flashing

• sounding of an acoustic alarm until key (E)

is pressed

At this point bear in mind to remove the

drinks contained in the freezer compartment.

It is possible to deactivate the function at any

time by pressing key (D) until the correspond-

ing icon will flash and then key (E).

Temperature alarm

Temperature increase in the freezer com-

partment (for example due to an power fail-

ure or door Is open) is indicated by:

• flashing temperature

• flashing icon 

• acoustic buzzer

Press button (E) to cancel the acoustic alarm.

When normal conditions are restored:

• the acoustic alarm will stop

• the temperature value continues to flash

Press button (E) to show the warmest food

temperature reached. After some seconds

the temperature indicator returns to normal

operation and shows actual temperature.

Door open alarm

An acoustic alarm will sound if the door is left

open for a few minutes. The door open alarm

conditions are indicated by:

• flashing icon 

• acoustic buzzer

Press button (E) to cancel the acoustic alarm.

When normal conditions are restored (door

closed), the acoustic alarm will stop.

FIRST USE

Cleaning the interior

Before using the appliance for the first time,

wash the interior and all internal accessories

with lukewarm water and some neutral soap

so as to remove the typical smell of a brand-

new product, then dry thoroughly.

Important!

 Do not use detergents or abra-

sive powders, as these will damage the fin-

ish.

DAILY USE

Use of the freezer compartment

The symbol 

 means that the

freezer is suitable for freezing fresh food and

for long term storage. The temperature may

be regulated between -15°C and -24°C. We

suggest setting the temperature to -18°C,

which is optimal for energy consumption and

frozen food storage.

Important!

 At start-up the displayed

temperature don't correspond with the set

temperature until stabilised (within 24 hours).
Difference between the temperature dis-

played and temperature setting is normal.

Especially when:

• a new setting has recently been selected

• the door has been left open for a long time

• warm food has been placed in the com-

partment.

Difference until 5°C inside the compartment

are quite normal.

During normal functioning the indicator

shows the warmest temperature inside the

compartment.

Storage of frozen food

When first starting-up or after a period out of

use, before putting the products in the com-

partment let the appliance run at least 2

hours.

The freezer baskets ensure that it is quick

and easy to find the food package you want.

If large quantities of food are to be stored,

remove all drawers except for the bottom

basket which needs to be in place to provide

good air circulation. On all shelves except for

the top shelf it is possible to place food that

protrude until load limit stated on the side of

the middle section

 electrolux

Summary of Contents for EUF29400X

















Reviews: