Electrolux EUF7000W1, User Manual

1

2

3

5. Unscrew and move the pedal to the

opposite side (3).

6. Unscrew and move the bracket to the

other side on the door.

2

1

7. Screw on the lower hinge on the

opposite side.

8. Tighten the pin with the adjustment

spanner supplied.

9. Raise the appliance and install the

ventilation grille.

10. Remove the covers on the handles

carefully with a small screwdriver.

11. Unscrew the handle.

12. On the opposite side remove the hole

covers by driving a 3-4 mm drift or

drill into them.

13. Install the handle.

14. Install the covers on the handle.

15. Install the hole covers provided within

the accessory bag.

16. Put the cabinet in position.

CAUTION!

Reposition, level the

appliance, wait for at least

four hours and then connect

it to the power socket.

Do a final check to make

sure that:

• All screws are tightened.

• The magnetic seal

adheres to the cabinet.

• The door opens and

closes correctly.

If the ambient temperature is

cold (i.e. in Winter), the

gasket may not fit perfectly

to the cabinet. In that case,

wait for the natural fitting of

the gasket.

In case you do not want to

carry out the above

mentioned operations,

contact the nearest

Authorised Service Centre.

The Authorised Service

specialist will carry out the

reversibility of the doors at

your cost.

9. NOISES

There are some sounds during normal running (compressor, refrigerant circulation).

www.electrolux.com

14