Electrolux EUG 23800, User Manual

10 electrolux

To set a warmer temperature, press
button (C). To set a colder
temperature, press button (E). The
indicator display the newly selected
temperature for a few seconds and
then shows again the inside
compartment temperature.

The newly selected-temperature must
be reached after 24 hours.

Attention!

During the stability period by the first
starting the temperature displayed can
not correspond to the setting
temperature. During this time it is
possible that the temperature
displayed is lower than the setting
temperature.

D. Temperature indicator

During normal functioning the indicator
shows the temperature inside the
freezer.

Attention!

Difference between the temperature
displayed and temperature setting is
normal. Especially when:
-  a new setting has recently been

selected

-  the door has been left open for a

long time

-  warm food has been placed in the

compartment

F. Super frost pilot light

G. Super frost button

To freeze fresh foods, the “Super frost”
function must be activated. Press the
super frost button (G).The relevant pilot
light (F) switches on

The function can be deactivated at any
time, by pressing the button (G),
otherwise it automatically switches off.
With deactivated function the pilot light
(F) switches off.

H. Alarm reset light

I. Alarm reset button

In the event of an abnormal
temperature rise inside the freezer (e.g.
power cut) the warning light (H) will
start to flash and a buzzer will sound.

After the temperature has returned to
normal, the warning light (H) will
continue to flash, although the buzzer
has stopped.

When the alarm button (I) is pressed,
the warmest temperature reached in
the compartment flashes on the
indicator (D).

If the power has been off for a long
time, frozen food should be consumed
as quickly as possible, or cooked and
then re-frozen.