out by a qualified electrician or compe-
tent person.
• This product must be serviced by an au-
thorized Service Centre, and only genu-
ine spare parts must be used.
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer,
in either its refrigerant circuit or insula-
tion materials. The appliance shall not
be discarded together with the urban re-
fuse and rubbish. The insulation foam
contains flammable gases: the appli-
ance shall be disposed according to
the applicable regulations to obtain
from your local authorities. Avoid dam-
aging the cooling unit, especially at the
rear near the heat exchanger. The ma-
terials used on this appliance marked
by the symbol
are recyclable.
CONTROL PANEL
Freezer Control panel
1 2
3
4
5 6 7 8 9
1
Pilot light
2
ON/OFF switch
3
Temperature regulator (warmest)
4
Temperature indicator
5
Temperature regulator (coldest)
6
Action Freeze light
7
Action Freeze switch
8
Alarm light
9
Alarm reset switch
Switching on
Insert the plug into the wall socket.
Press the ON/OFF switch .
The Pilot Light will light up.
Switching off
Press ON/OFF switch until a countdown
from -3 -2 -1 is completed.
The temperature indicator switches off. The
Pilot light switches off.
Temperature regulation
The temperature can be adjusted between
-15°C and -24°C.
By pressing the Temperature regulators ,
the current temperature setting flashes on
the Temperature indicator. It is possible to
modify the setting temperature only with
flashing indicator. To set a warmer tempera-
ture, press warmest Temperature regula-
tor . To set a colder temperature, press cold-
est Temperature regulator. The Tempera-
ture indicator displays the newly selected
temperature.
The newly selected-temperature will be
reached within 24 hours.
Temperature indicator
During normal functioning the Temperature
indicator shows the latest set temperature.
Action Freeze function
You can activate the Action Freeze function
by pressing the Action Freeze switch.
The Action Freeze light will light up.
This function stops automatically after 52
hours.
It is possible to deactivate the function at
any time by pressingAction Freeze switch.
The Action Freeze light will switch off.
Excessive temperature alarm
In the event of an abnormal temperature
rise inside the freezer (e.g. power cut) Alarm
light will start to flash and a buzzer will sound.
After the temperature has returned to nor-
mal, the Alarm light will continue to flash, al-
though the buzzer has stopped.
When the Alarm reset switch is pressed,
the warmest temperature reached in the
electrolux
13
