Electrolux EUT1100FW, User Manual

5.

If the power plug socket is loose, do
not insert the power plug. There is a
risk of electric shock or fire.

6.

You must not operate the appliance
without the lamp cover (if foreseen)
of interior lighting.

• This appliance is heavy. Care should be

taken when moving it.

• Do not remove nor touch items from the

freezer compartment if your hands are
damp/wet, as this could cause skin
abrasions or frost/freezer burns.

• Avoid prolonged exposure of the appli-

ance to direct sunlight.

• Bulb lamps (if foreseen) used in this ap-

pliance are special purpose lamps selec-
ted for household appliances use only.
They are not suitable for household room
illumination.

WARNING!

Do not place frozen food on the
worktop since cold and vapour
may produce water condensate
within its inner side. The resulting
drip liquid may cause malfunctions.
Therefore, do not place nor leave
frozen items of any kind on the
worktop.

DAILY USE

• Do not put hot pot on the plastic parts in

the appliance.

• Do not store flammable gas and liquid in

the appliance, because they may ex-
plode.

• Do not place food products directly

against the air outlet on the rear wall. (If
the appliance is Frost Free)

• Frozen food must not be re-frozen once

it has been thawed out.

• Store pre-packed frozen food in accord-

ance with the frozen food manufacturer's
instructions.

• Appliance's manufacturers storage rec-

ommendations should be strictly ad-
hered to. Refer to relevant instructions.

• Do not place carbonated or fizzy drinks

in the freezer compartment as it creates
pressure on the container, which may
cause it to explode, resulting in damage
to the appliance.

• Ice lollies can cause frost burns if con-

sumed straight from the appliance.

CARE AND CLEANING

• Before maintenance, switch off the appli-

ance and disconnect the mains plug
from the mains socket.

• Do not clean the appliance with metal

objects.

• Do not use sharp objects to remove frost

from the appliance. Use a plastic scra-
per.

• Never use a hair drier or other heating

appliances to speed up defrosting. Ex-
cessive heat may damage the plastic in-
terior, and humidity could enter the elec-
tric system making it live.

INSTALLATION

For electrical connection carefully
follow the instructions given in spe-
cific paragraphs.

• Unpack the appliance and check if there

are damages on it. Do not connect the
appliance if it is damaged. Report possi-
ble damages immediately to the place
you bought it. In that case retain pack-
ing.

• It is advisable to wait at least four hours

before connecting the appliance to allow
the oil to flow back in the compressor.

• Adequate air circulation should be

around the appliance, lacking this leads
to overheating. To achieve sufficient ven-
tilation follow the instructions relevant to
installation.

• Wherever possible the back of the prod-

uct should be against a wall to avoid
touching or catching warm parts (com-
pressor, condenser) to prevent possible
burn.

• The appliance must not be located close

to radiators or cookers.

• Make sure that the mains plug is acces-

sible after the installation of the appli-
ance.

• Connect to potable water supply only (If

a water connection is foreseen).

SERVICE

• Any electrical work required to do the

servicing of the appliance should be car-
ried out by a qualified electrician or com-
petent person.

4

www.electrolux.com