8.1
What to do if...
Problem
Possible cause
Solution
The appliance does not op-
erate.
The appliance is switched
off.
Switch on the appliance.
The mains plug is not con-
nected to the mains socket
correctly.
Connect the mains plug to
the mains socket correctly.
There is no voltage in the
mains socket.
Connect a different electri-
cal appliance to the mains
socket. Contact a qualified
electrician.
The appliance is noisy.
The appliance is not sup-
ported properly.
Check if the appliance
stands stable.
Audible or visual alarm is
on.
The cabinet has been re-
cently switched on or the
temperature is still too high.
Refer to "Door Open
Alarm"or "High Tempera-
ture Alarm".
The temperature in the ap-
pliance is too high.
Refer to "Door Open
Alarm"or "High Tempera-
ture Alarm".
Power indicator light is
flashing.
An error has occurred in
measuring the temperature.
Contact a qualified electri-
cian or contact the nearest
Authorized Service Centre.
The appliance is not work-
ing properly.
Contact a qualified electri-
cian or contact the nearest
Authorized Service Centre.
The temperature in the ap-
pliance is too high.
Contact a qualified electri-
cian or contact the nearest
Authorized Service Centre.
The compressor operates
continually.
Temperature is set incor-
rectly.
Refer to "Operation" chap-
ter.
Many food products to be
frozen were put in at the
same time.
Wait some hours and then
check the temperature
again.
The room temperature is
too high.
Refer to climate class chart
on the rating plate.
Food products placed in
the appliance were too
warm.
Allow food products to cool
to room temperature before
storing.
The door is not closed cor-
rectly.
Refer to "Closing the door".
There is too much frost and
ice.
The door is not closed cor-
rectly or the gasket is de-
formed/dirty.
Refer to "Closing the door".
www.electrolux.com
10
