background image

12 DISPLAY

The display shows the following information:

Cancelling - Duration of the programme -
Delayed start - Incorrect option selection - Alarm
code - End of programme.

If a programme has been cancelled - programme
selector dial on position 

O

- three flashing dashes

appear on the display.

Now you can select a new programme.

After selecting a programme, the duration is
displayed in hours and minutes ( for example 

2.05

).

The duration is calculated automatically on the basis of
the maximum recommended load for each type of fabric.

After the programme has started, the time remaining
is updated every minute.

The selected delay (24 hours max) set by means of
the relevant button appears on the display for 3
seconds, then the duration of the previously selected
programme is displayed.

Delayed start

2.05

Duration of the selected

programme

---

Cancelling

The countdown is updated every hour.

If an option which is not compatible with the set wash
programme is selected, the message 

Err

is

displayed for 2 seconds.

In the event of operating problems, some alarm
codes can be displayed, for example E20 (see
paragraph “Something not working”).

E20

Alarm codes

Incorrect option selection

12

132997230•gb  19-04-2001  15:24  Pagina 12

Summary of Contents for EW 1067 F


























Reviews: