14
Operating sequence
1. Place the laundry in the drum.
Open the loading door by
depressing the relevant
button. Place the gar-
ments to be washed in-
side the drum one by one
laying them as flat as
possible. Close the door
ensuring that the catch
clicks into place.
2. Measure out the detergent into the
dispenser drawer.
Pull out the detergent dispenser drawer from the con-
trol panel.
Pour the detergent into the main wash compartment.
Follow the detergent manufacturer’s guidelines for the
amount required.
If you wish to carry out a prewash, pour the amount of
detergent required into the «prewash»compartment.
3. Add the liquid additives if required.
Pour the softener, if
required, into the com-
partment marked
and
the bleaching agent into
the compartment marked
.
Do not exceed the MAX
level.
4. Press the button required
Depress
or
depending on the selected pro-
gramme.
5. Select the temperature
Turn the dial to the re-
quired temperature.
6. Select the required programme
Turn the dial clockwise
until the programme
coincides exactly with
the marker.
7. Start the machine
Turn on the water tap.
Check that the drain hose is correctly positioned.
Depress the on/off but-
ton, the mains-on light
and door locked light will
illuminate and the
machine starts opera-
ting.
8. At the end of the programme
The appliance stops automatically.
If you have selected a gentle programme with the
rinse hold option, drain the water before opening the
door.
Wait one or two minutes before opening the door
to give the electric locking mechanism time to release
it. The door can be opened when the door locked light
goes out.
Depress the on/off button, the mains-on light goes out.
Turn the water tap off and unplug the machine from
the mains.
Open the loading door and remove the laundry.
Ensure that the drum is completely empty by turning it
with one hand.
Leave the door ajar for a while to eliminate the steam.
P0004
P0908
Cl
P0910
Cl
P0911
Cl
P0882
A
P0881
95
°
P0033
Summary of Contents for EW 510 F
Page 17: ...124890710 Z ...