20
■
Problem
■
Possible cause
■
The machine vibrates or is noisy:
■
Check that all the transit bolts and packing
have been removed.
■
Check that the machine is not resting against
anything.
■
Check that the support feet are resting firmly
on the ground.
■
Check that the laundry is evenly distributed in
the drum.
■
Maybe there is very little laundry in the drum.
■
The door will not open:
■
The programme is still running.
■
The door lock has not yet been released.
■
There is water in drum.
■
Water is not visible in the
machine:
■
The machine, which is the result of modern
technology, runs in a very economical way
with low water consumption. Performance is
nevertheless excellent.
If you are unable to identify or solve the
problem, contact our service centre. Before
telephoning, make a note of the model, serial
number and purchase date of your machine: the
Service Centre will require this information.
Mod. ..........
Prod. No. ...........
Ser. No. .........
Mod.
..........
Ser.
P0042
■
Spinning starts late or the
machine does not spin:
■
The electronic unbalance detection device
has cut in because the laundry is not evenly
distributed in the drum. The laundry is
redistributed by reverse rotation of the drum.
This may happen several times before the
unbalance disappears and normal spinning
can resume. If, after 6 minutes, the laundry is
still not evenly distributed in the drum, the
machine will not spin. In this case,
redistribute the load manually and reselect
the spin programe.
■
The machine makes an unusual
noise:
■
The machine is fitted with a commutator
motor which makes an unusual noise
compared with other traditional machines.
This motor enables a softer start to the spin
and controls the increase in spin speed
better. In this way, machine performance is
improved.
