French Door Refrigerators
EW28BS70I S, EW28BS70I W, EW28BS70I B
High standards of quality at Electrolux Home Products, Inc. mean
we are constantly working to improve our products. We reserve the right
to change specifications or discontinue models without notice.
Electrolux Major Appliances, N.A.
USA
•
250 Bobby Jones Expressway
•
Augusta, GA 30907
•
1-877-4electrolux (1-877-435-3287)
•
electroluxappliances.com
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
electroluxappliances.ca
EW28BS70I 03/09
© 2009 Electrolux Home Products, Inc.
Printed in the U.S.A.
Standard-Depth French Door Refrigerator Specifications
•
Product Weight – 360 Lbs.
•
An electrical supply with grounded three-prong receptacle is required. The
power supply circuit must be installed in accordance with current edition
of National Electrical Code (NFPA 70) and local codes & ordinances.
•
Voltage Rating – 120V / 60 Hz / 15 or 20 Amps
•
Connected Load (kW Rating) @ 120 Volts = 1.02 kW
•
Amps @ 120 Volts = 8.5 Amps
•
Always consult local and/or national electric & plumbing codes.
•
Floor should be level surface of hard material, capable of supporting fully
loaded refrigerator.
•
When installing refrigerator adjacent to wall, cabinet or other appliance
that extends beyond front edge of unit, 20" minimum clearance
recommended to allow for optimum 120° to 180° door swing, providing
complete drawer / crisper access and removal.
(Absolute 4-1/2" minimum
clearance will ONLY allow for 90° door swing which will provide
drawer / crisper access with restricted removal.)
•
To ensure optimum performance, avoid installing in direct sunlight or
close proximity to range, dishwasher or other heat source.
•
For proper ventilation, front grille MUST remain unobstructed.
•
Recess electrical outlet when possible.
•
Water recess on rear wall recommended to prevent water line damage.
•
Water Pressure – Cold water line must provide between 30 and 100
pounds per square inch (psi).
•
Copper tubing with 1/4" O.D. recommended for water supply line with
length equal to distance from rear of unit to household water supply line
plus 7 additional feet. Optional Water Supply Installation Kits available.
•
Adjustable front rollers to assist with door alignment.
“Built-In Look” Specifications
•
Minimum opening of 70-1/4" H x 36" W x 28-7/8" D required to allow for
ease of installation, proper air circulation, and plumbing / electrical
connections.
•
Remove all wall / floor molding prior to installation.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxappliances.com for detailed instructions.
B
C
A
Top View
24"
Cabinet
28
7
/
8
" Side Panels,
1
/
2
" min. width
25"
Countertop
Allow 1" min. clearance at rear
for proper air circulation and
water / electrical connections
Recessed
water line
Recessed
electrical outlet
Standard Depth
Standard
Refrigerator Depth
vs. Counter Depth
23
5
/
8
"
Counter Depth
28
1
/
2
"
CL
31
3
/
4
"
Overall depth at center
of arc – 33"
35
5
/
8
"
68
3
/
16
"
with
3
/
8
"
rollers
4
7
/
8
"
35
3
/
4
"
28
1
/
2
"
69
1
/
2
"
with
3
/
8
"
rollers
Power
cord
location
(right
bottom
rear)
Water
line inlet
location
(left
bottom
rear)
47
7
/
16
" (with doors
90
°
open)
54
3
/
4
"
(with drawer
fully extended
including handle)
“Built-In Look”
Cutout Dimensions
(A) 70
1
/
4
" (B) 36" (C) 28
7
/
8
"
