12
Removing and replacing oven racks
Removing Sliding Oven Racks
1. With the rack in its closed position; grasp the
rack and the sliders at once.
2. Slightly lift the rack and sliders and pull it to
clear the fi rst bracket.
3. Pull the rack and sliders until the second bracket
stops the rack.
4. Lift the rack and sliders and carefully remove
them from the oven.
Replacing Sliding Oven Racks
To replace the oven racks, follow the instructions
above in reverse order.
Refer to the care and cleaning section for directions
on how to clean the racks.
Oven Rack
Oven Rack Slider
Oven Rack Support
T
oward front of oven
T
oward back of oven
1st Bracket
2nd Bracket
Removing Non-Sliding Oven Rack
Simply pull the rack and slightly tilt it upward when
the rack hits its stop position.
Replacing Non-Sliding Oven Rack
Insert the rack into the oven rack supports by
inserting the rack openings into the rack supports.
Be sure the rack is at the same position on each
oven rack support on both sides.
Insert the openings
into the rack support
Always arrange the oven racks when the oven is cool (prior to operating the oven). Always use oven
mitts when using the oven.
Features