Make sure that you APP is
ready for connection.
4. After about 45 seconds,
(Access Point) appears on the
display.
The access point will be open for about 3
minutes.
As long as the appliance is
activated, it will keep trying
to connect with saved
credentials until the Wi-Fi is
deactivated or resets the
credentials.
5. Configure the "My Electrolux" app on
your smart device and follow the
instructions to connect the appliance
to your Wi-Fi network.
6. If the connectivity is configured, when
the programme information screen
returns, the indicator is on the
display.
Every time you switch the
appliance on, the appliance
takes 45 seconds to connect
to the network automatically.
When the indicator stops
blinking the connection is
ready.
To switch the wireless connection off,
touch the
and the buttons
simultaneously for a few seconds until
the first acoustic signal:
appears
on the display for 5 seconds.
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless credentials,
press and hold the
and the
buttons simultaneously for 10 seconds
until the second acoustic signal:
appears on the display.
9.3 Remote Start
The Remote Start enables you to start a
cycle in remote control.
The Remote Control
activates automatically when
you press the Start/Pause
button to start the
programme, but it is also
possible to start a washing
programme remotely.
When the App is installed and the
wireless connection is complete, you can
activate the Remote Start:
1. Touch the Remote start button
and the indicator
appears on
the display for a few seconds.
www.electrolux.com
30
Summary of Contents for EW6F348SA
Page 1: ...EW6F348SA EN Washing Machine User Manual ...
Page 53: ...ENGLISH 53 ...
Page 54: ...www electrolux com 54 ...
Page 55: ...ENGLISH 55 ...