3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.1 Unpacking
1. Remove the external film. If
necessary, use a cutter.
2. Remove the cardboard top and the
polystyrene packaging materials.
3. Open the door. Remove all the items
from the drum.
4. Put the front polystyrene packaging
element on the floor under the
appliance. Carefully put down the
appliance onto its rear side.
5. Remove the polystyrene protection
from the bottom. Put the appliance
back into an upright position.
1
2
6. Remove the power supply cable and
the drain hose from the hose holders.
WARNING!
It is possible to see
water flowing from the
drain hose. This is
because the washing
machine has been
tested at the factory.
7. Remove the three transit bolts and
pull out the plastic spacers.
ENGLISH
7
Summary of Contents for EW6F348SA
Page 1: ...EW6F348SA EN Washing Machine User Manual ...
Page 53: ...ENGLISH 53 ...
Page 54: ...www electrolux com 54 ...
Page 55: ...ENGLISH 55 ...