4. Remove the polystyrene protection
from the bottom. Put the appliance
back into an upright position.
1
2
5. Remove the power supply cable and
the drain hose from the hose holders.
WARNING!
It is possible to see
water flowing from the
drain hose. This is
because the washing
machine has been
tested at the factory.
6. Remove the three transit bolts and
pull out the plastic spacers.
7. Put the plastic caps, that you find in
the user manual bag, in the holes.
We recommend that you
keep the packaging and
the transit bolts for any
transport of the appliance.
3.2 Positioning and levelling
Adjust the appliance correctly to prevent
vibration, noise and movement of the
appliance when it operates.
x4
1. Install the appliance on a flat hard
floor. The appliance must be levelled
ENGLISH
7
Summary of Contents for EW6F428W
Page 1: ...EW6F428W EN Washing Machine User Manual ...
Page 38: ...www electrolux com 38 ...
Page 39: ...ENGLISH 39 ...