Electrolux EW6F448BU, User Manual

If the SensiCare System has

completed and the water

filling has already started,

the new programme starts 

without repeating the

SensiCare System. The

water and the detergent are

not drained out in order to

avoid waste.

There is also an alternative way of

cancelling:

1. Rotate the selector knob to the "Reset"
position  .

2. Wait for 1 second. The display shows

.

Now, you can set a new washing

programme.

11.11 Opening the door -

Adding garments

If the temperature and level

of the water in the drum are

too high and/or the drum is

still rotating you cannot open

the door.

While a programme or the delay start

operates, the appliance door is locked.

1. Touch the button Start/Pause 

.

In the display the related door lock

indicator goes off.

2. Open the appliance door. If

necessary, add or remove the items.

3. Close the door and touch the Start/

Pause 

 button.

The programme or the delay start

continues.

11.12 End of the programme

When the programme has finished, the

appliance stops automatically. The

acoustic signals operate (if they are
active). The display shows 

The indicator of the Start/Pause 

button goes off.

The door unlocks and the indicator 

goes off.

1. Press button On/Off  to deactivate

the appliance.

After five minutes from the end of the

programme, the energy saving function

automatically deactivates the appliance.

When you activate the

appliance again, the display

shows the end of the

previous programme. Turn

the programme dial to set a

new cycle.

2. Remove the laundry from the

appliance.

3. Make sure that the drum is empty.

4. Keep the door and the detergent

dispenser slightly ajar to prevent

mildew and odours.

5. Close the water tap.

11.13 Draining water out after

end of cycle

If you have chosen a programme or an

option that does not empty out the water

of the last rinse, the programme is

completed, but:

• The time area shows 

 and the

display shows the door locked 

.

• The drum still turns at regular

intervals to prevent creases in the

laundry.

• The door stays locked.

• You must drain the water to open the

door:

1. If necessary, touch the Spin 

button to decrease the spin speed

proposed by the appliance.

2. Press theStart/Pause 

 button:

• If you have set Rinse Hold 

 the

appliance drains the water and

spins.

• If you have set Night   the

appliance only drains the water

The option indicator Rinse Hold 

disappears.

3. When the programme is completed

and the door locked indicator 

goes off, you can open the door.

4. Press the On/Off  button for a few

seconds to deactivate the appliance.

ENGLISH

23