Electrolux EW6S426BI, User Manual

Manager bars 

 placed below the

time digits play a simple animation.

2. After about 15-20 minutes the Time

Manager bars disappear and new

cycle duration is displayed.

The appliance automatically adjusts

the programme duration to the load

to achieve perfect washing results in

the minimum possible time.

11.9 Interrupting a programme

and changing the options

When the programme is running, you

can change only some options:

1. Touch the button Start/Pause 

.

The related indicator flashes.

2. Change the options. The given

information in the display changes

accordingly.

3. Touch the button Start/Pause 

again.

The washing programme continues.

11.10 Cancelling a running

programme

1. Press the button On/Off to cancel the

programme and to deactivate the

appliance.

2. Press the button On/Off again to

activate the appliance.

If the SensiCare System has

completed and the water

filling has already started,

the new programme starts 

without repeating the

SensiCare System. The

water and the detergent are

not drained out in order to

avoid waste.

There is also an alternative way of

cancelling:

1. Rotate the selector knob to the "Reset"
position  .

2. Wait for 1 second. The display shows

.

Now, you can set a new washing

programme.

11.11 Opening the door -

Adding garments

If the temperature and level

of the water in the drum are

too high and/or the drum is

still rotating you should not

open the door.

While a programme or the delay start

operates, the appliance door is locked.
The display shows the indicator 

.

1. Touch the button Start/Pause 

.

The indicator 

 starts flashing.

2. Wait until the door lock indicator 

stops flashing and goes off. Open the

appliance door. If necessary, add or

remove the items. Close the door
and touch the Start/Pause 

button. The programme or the delay

start continues.

11.12 End of the programme

When the programme has finished, the

appliance stops automatically. The

acoustic signals operate (if they are
active). The display shows 

The indicator of the Start/Pause 

button goes off.

The door unlocks and the indicator 

goes off.
1. Press button On/Off  to deactivate

the appliance.

After five minutes from the end of the

programme, the energy saving function

automatically deactivates the appliance.

When you activate the

appliance again, the display

shows the end of the

previous programme. Turn

the programme dial to set a

new cycle.

2. Remove the laundry from the

appliance.

3. Make sure that the drum is empty.

4. Keep the door and the detergent

dispenser slightly ajar to prevent

mildew and odours.

5. Close the water tap.

www.electrolux.com

22