Electrolux EW6T5621AI, User Manual

1. Touch the Inicio/Pausa 

 button to

pause the appliance. The related

indicator flashes.

2. Touch the Inicio Diferido button

repeatedly until the display shows the

desired delay time.

3. Touch the Inicio/Pausa 

 button

again to start the new countdown.

9.8 The SensiCare System load

detection

After touching the Inicio/Pausa 

button:
1. The SensiCare System starts

estimating the weight of the load to

calculate the real programme

duration. During this phase the two

dots separating hours from minutes

are blinking

2. After about 15-20 minutes new cycle

duration is displayed.

The appliance automatically adjusts

the programme duration to the load

to achieve perfect washing results in

the minimum possible time.

9.9 Interrupting a programme

and changing the options

When the programme is running, you

can change only some options:

1. Touch the button Inicio/Pausa 

.

The related indicator flashes.

2. Change the options. The given

information in the display changes

accordingly.

3. Touch the button Inicio/Pausa 

again.

The washing programme continues.

9.10 Cancelling a running

programme

1. Press the button On/Off to cancel the

programme and to deactivate the

appliance.

2. Press the button On/Off again to

activate the appliance.

If the SensiCare System has

completed and the water

filling has already started,

the new programme starts 

without repeating the

SensiCare System. The

water and the detergent are

not drained out in order to

avoid waste.

There is also an alternative way of

cancelling:

1. Rotate the selector knob to the "Reset"
position  .

2. Wait for 1 second. The display shows

.

Now, you can set a new washing

programme.

9.11 End of the programme

When the programme has finished, the

appliance stops automatically. The

acoustic signals operate (if they are
active). The display shows 

The indicator of the Inicio/Pausa 

button goes off.

The lid unlocks and the indicator 

goes off.
1. Press button On/Off to deactivate the

appliance.

After five minutes from the end of the

programme, the energy saving function

automatically deactivates the appliance.

When you activate the

appliance again, the display

shows the end of the

previous programme. Turn

the programme dial to set a

new cycle.

2. Remove the laundry from the

appliance.

3. Make sure that the drum is empty.

4. Keep the lid and the detergent

dispenser slightly ajar to prevent

mildew and odours.

5. Close the water tap.

ENGLISH

17