Electrolux EW7F3844HB, User Manual

display and the given information

changes accordingly.

If a selection is not possible

an acoustic signal sounds

and the display shows

.

10.6 Starting a programme

Touch the Start Pause 

 button to start

the programme. It is not possible to start

the programme when the indicator of the

button is off and doesn't flash (e.g.

programme dial on a wrong position).

The related indicator stops flashing and

stays on.

The programme starts, the door is

locked. The display shows the indicator

.

The drain pump can operate

shortly before the appliance

fills water.

10.7 Starting a programme with

the delay start

1. Touch the Delay Start 

 button

repeatedly until the display shows the

desired delay time. On the display the
indicator shows 
2. Touch the Start Pause 

 button. The

appliance door locks and starts the

countdown of the delay start. The display
shows the indicator 

.

When the countdown is completed, the

programme starts automatically.

Cancelling the delay start after

the countdown has started

To cancel the delay start:

1. Touch the Delay Start   button

repeatedly until the display shows the

desired delay time. On the display
the indicator shows 

Touch the Start Pause 

 button. The

appliance lock the door and starts the

countdown of the delay start. The display
shows the indicator 

.

When the countdown is completed, the

programme starts automatically.
2. Touch the Start Pause 

 button to

pause the appliance. The related

indicator flashes.

3. Touch the Delay Start   button

repeatedly until the display shows 
and the indicator   goes off.

4. Touch the Start Pause 

 button

again to start the programme

immediately.

Changing the delay start after

the countdown has started

To change the delay start:

1. Touch the Start Pause 

 button to

pause the appliance. The related

indicator flashes.

2. Touch the Delay Start   button

repeatedly until the display shows the

desired delay time.

3. Touch the Start Pause 

 button

again to start the new countdown.

10.8 The SensiCare System

load detection

The programme duration in

the display is referred to a 

medium/high load.

After touching the Start Pause 

button, the maximum declared load

indicator goes off, the SensiCare System

starts the laundry load detection:
1. The appliance detects the load in the

first 30 seconds. In the programmes

where Time Manager is available,

during this phase the Time Manager
bars 

 placed below the time

digits play a simple animation. The

drum rotates shortly.

2. The programme duration could be

adjusted accordingly and could

increase or decrease. After further 30

seconds, the water filling starts.

www.electrolux.com

24