Electrolux EW7W3964LB, User Manual

11.1 NON-STOP programme -

Wash and dry

Not all programmes are

compatible with drying

function. The One GO 1h

1kg programme is already a

complete wash&dry

programme.

You can wash and dry your laundry

setting a «non stop-programme».

Proceed as follows:
1. Press the On/Off button for some

seconds to activate the appliance.

2. Load the laundry one item at a time.

3. Put the detergent and the additives in

the appropriate compartment.

4. Turn the programme dial to the

washing programme. The appliance

defaults to the washing only mode

and the indicator of the Modo - Lav.

button is on. The display shows the

default temperature and spin. If

necessary, change them according to

your laundry. The display also shows

the maximum recommended load for

washing phase.

5. Set the desired options, if there are

available.

6. Tap on the Modo - Sec. button to

activate also the drying function. Both

indicators of the Modo - Lav. and

Modo - Sec. buttons are on. The
indicators 

 and   appear on the

display. The display also shows the

maximum recommended load for a

washing and drying programme (e.g.

6 kg for cottons).

11.2 Washing and Drying -

Automatic levels

1. Tap on the Auto Dry button

repeatedly until the display shows the

required dryness level. The indicators

in the display illuminate accordingly:

a.

 Iron dry: for cotton items;

b.

 Cupboard dry: for cotton and

synthetic items;

c.

 Extra dry: for cotton items.

The time value on the display is the

duration of both cycles washing and

drying, calculated on a default load

size.

To have a good drying by

using less energy and in a

shorter time, the appliance

does not let you set a too

low spin speed for the items

to be washed and dried.

2. Touch button Inicio/Pausa 

 to

start the programme. The SensiCare

estimation starts.

In the display the door locked 

indicator comes on.

The display also shows the remaining

programme time.

11.3 Washing and Timed

Drying

1. Tap on the Tiempo/Tempo sec.

button repeatedly to set the desired

time value (see the "Timed drying"

table the "Programmes" chapter).
The drying level indicator   goes off
and the indicator   comes on.

Each time you tap on this button the time

value increases by 5 minutes. The

display shows the set new time value.
2. Touch the Inicio/Pausa 

 button to

start the programme. The SensiCare

estimation starts.

In the display the door locked 

indicator comes on.

The display also shows the remaining

programme time.

11.4 At the end of the drying

programme

• The appliance stops automatically.

• The acoustic signals operate (if they

are active).

• In the display 

 comes on.

• The indicator of button Inicio/Pausa

goes off. The door locked 

 goes

off.

The appliance continues to operate

with the anti-crease phase for

approximately 30 minutes or more if

Anti-crease option was set.

www.electrolux.com

30