Electrolux EW8F228S, User Manual

1. The appliance detects the load in the

first 30 seconds. During this phase
the Time Manager bars 

 placed

below the time digits play a simple

animation, the drum rotates shortly.

2. The programme duration will be

adjusted accordingly and could

increase or decrease. After further 30

seconds, the water filling starts.

At the end of the load detection, in case
of drum overload, the indicator 

 is

flashing in the display:
In this case, for 30 seconds, it is possible

to pause the appliance and remove the

exceeding garments.
Important! If the laundry amount will not

be reduced, the washing programme

starts anyway, despite the overload. In

this case, it will be not possible to

guarantee the best washing results.

About 20 minutes after the

programme start, the

programme duration could

be adjusted again depending

on the capacity of water

absorption of the fabrics.

The SensiCare detection is

carried out with complete

washing programmes only

and if the programme

duration has not been

reduced by means of the

Time Manager button.

11.9 Interrupting a programme

and changing the options

When the programme is running, you

can change only some options:

1. Touch the Start/Pause 

 button.

The related indicator flashes.

2. Change the options. The given

information in the display changes

accordingly.

3. Touch the Start/Pause 

 button

again.

The washing programme continues.

To start the programme

again make sure that the

programme dial is correctly

positioned on the interrupted

programme and the indicator
of the Start/Pause 

 button

is flashing.

11.10 Cancelling a running

programme

1. Press the button On/Off to cancel the

programme and to deactivate the

appliance.

2. Press the button On/Off again to

activate the appliance.

If the SensiCare System has

completed and the water

filling has already started,

the new programme starts 

without repeating the

SensiCare System. The

water and the detergent are

not drained out in order to

avoid waste. The display

shows the maximum

duration of the programme,

updating it about 20 minutes

after the starting of the new

programme.

There is also an alternative way of

cancelling:

1. Rotate the selector knob to the "Reset"
position  .

2. Wait for 1 second. The display shows

.

Now, you can set a new washing

programme.

11.11 Opening the door -

Adding garments

If the temperature and level

of the water in the drum are

too high and/or the drum is

still rotating you cannot open

the door.

While a programme or the delay start

operates, the appliance door is locked.

1. Touch the button Start/Pause 

.

ENGLISH

23