Electrolux EWF 10570 W, User Manual

use 

electrolux  

13

Rinse Hold:

by selecting this option

the water of the last rinse is not
emptied out to prevent the fabrics from
creasing. When the programme has
finished the display shows 

0.00

flashing, the pilot light 

9

is on, the light

of button 

8

is off and the door is

locked to indicate that the water must
be emptied out.

To empty the water out please read
chapter «At the end of the
programme»

.

Select the Prewash option by
pressing button

4

Select this option if you wish your
laundry to be prewashed at 30°C
before the main wash.

The Prewash ends with a short spin in
programmes for cotton and synthetic
fabrics, whereas in the programmes for
delicate fabrics the water is only
drained.

Select the Extra Rinse option by
pressing button 

5

The machine performs some additional
rinses. This option is recommended for
people who are allergic to detergents,
and in areas where the water is very
soft.

Select the Delay Start by pressing
button 

6

Before you start the programme, if you
wish to delay the start, press button 

6

repeatedly, to select the desired delay.
The relevant light will illuminate.

The selected delay time value (up to 20
hours) will appear on the display for a
few seconds, then the duration of the
programme will appear again.

You must select this option after you

have set the programme and before you
press button 

8

.

If you wish to add laundry in the
machine during the delay time you will
press button 

8

to put the machine in

pause. Add the laundry, close the door
and press  button 

8

again.

You can cancel or modify the delay time
at any moment, before you press
button 

8

.

The wash programme can be delayed
from 30 min - 60 min - 90 min, 2 hours
and then by 1 hour up to a maximum of
20 hours by means of this button.

Selecting the delayed start.

• Select the programme and the

required options.

• Select the delay start.

• Press button 

8

: the machine starts its

hourly countdown.

The programme will start after the
selected delay has expired.

Cancelling the delayed start after having
started the machine

• Press button 

8

.

• Press button 

6

button once until the

symbol 

0’

is displayed.

• Press button 

8

again.

The Delay Start 

can not 

be selected

with 

Drain

programme.

Select the Start/Pause by pressing
button 

8

To start the selected programme, press
button 

8

; the green pilot light stops

flashing.

To interrupt a programme which is
running, press button 

8

: the green pilot

light starts to flash.
To restart the programme from the point
at which it was interrupted, 

press

button 

8

again

.

132968970.qxd  20/11/2007  10.12  Pagina  13