16
7.Select the Spin Speed or Rinse
Hold Option
Press the “Spin” button repeatedly, in order to select
the desired spin speed or the Rinse Hold
option.
The relevant LED will light up.
If you select the Rinse Hold
option, the machine
will stop at the end of the programme eliminating the
spin phase.
EWF 1098
EWF 888
8.Select the desired option
Press the relevant button to select the required
options. Depending on the selected programme, only
certain options are available and shown during the
selection phase.
Note:
Not all the options are compatible between
themselves. The uncompatible option icons will
disappear.
Delay
Start
Prewash
Time
Save
Extra
Rinse
Fresh
Plus
0606
800
700
600
500
1106
1000
900
700
500
0706
9.Select the Delay Start
Before you start the programme if you wish the
machine to start at a later time, press the Delay Start
button. The figures corresponding to the selected
delay will be displayed for about 3 seconds, after
which the duration of the selected programme will
appear on the display.
During this period it is possible to load other laundry:
• Press “Start / Pause” button;
• load the laundry;
• close the door and press “Start / Pause” button
again.
10.Start the Programme
Press the “Start / Pause” button. The relevant
LED will stop flashing. and only the LED relevant to
the phase that is in progress will remain lit.
If you have chosen a Delay Start, the washing
machine will begin the countdown.
The display will show the duration of the programme
or the selected delay.
11.How to change a programme
during its cycle
You can alter the programme before it starts.
When the programme has started, you can only reset
it by turning the programme selector dial to «Off»
position and then you can select the new
programme. Start it by pressing the “Start / Pause”
button.
12.How to interrupt a programme
during its cycle
Press the “Start / Pause” button to interrupt a
programme which is running, the corresponding LED
starts to flash. Press the same button again to restart
the programme
.
0906
