will automatically select the maximum spin
value provided for the programme you have
chosen. You can change this value by press-
ing the corresponding button. The
green
pi-
lot light of the button
5
starts to flash.
The selector dial can be turned either clock-
wise or counterclockwise. Turn to position
«
O
» to reset programme/Switching the ma-
chine off.
At the end of the programme the selec-
tor dial must be turned to position O, to
switch the machine off.
Caution!
If you turn the programme
selector dial to another programme
when the machine is working, the
red
pilot light of button
5
will blink 3 times to
indicate a wrong selection. The machine
will not perform the new selected
programme.
Reduce the spin speed by pressing
button 2
By selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme.
Press button
2
repeatedly to change the spin
speed, if you want your laundry to be spun at
a different speed. The relevant light illumi-
nates.
Select the available options by pressing
buttons 2, 3 and 4
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired pro-
gramme and before starting the programme.
When these buttons are pressed, the corre-
sponding pilot lights illuminate. When they
are pressed again, the pilot lights go out. If
an incorrect option is selected, the integrated
red
pilot light of the button
5
flashes 3 times.
For the compatibility among the washing
programmes and the options see chap-
ter «Washing Programmes».
Select the Delay Start by pressing
button 6
Before you start the programme, if you wish
to delay the start, press the button
6
repeat-
edly, to select the desired delay. The relevant
light illuminates.
You must select this option after you have set
the programme and before you start the pro-
gramme.
You can cancel or modify the delay time at
any moment, before you press button
5
.
Selecting the delayed start:
1. Select the programme and the required
options.
2. Select the delay start by pressing the but-
ton
6
.
3. Press button
5
:
– the machine starts its hourly count-
down.
– The programme will start after the se-
lected delay has expired.
Cancelling the delayed start after having star-
ted the programme:
1. Set the washing machine to PAUSE by
pressing button
5
.
2. Press button
6
once, the light relevant to
the selected delay goes off
3. Press button
5
again to start the pro-
gramme.
The Delay Start
can not
be selected with
DRAIN
programme.
Important!
The selected delay can be
changed only after selecting the washing
programme again.
The door will be locked throughout the delay
time. If you need to open the door, you must
set the machine to PAUSE (by pressing the
button
5
) and then wait a few minutes. After
you have closed the door, press the button
5
again.
Start the programme by pressing button
5
To start the selected programme, press the
button
5
, the corresponding green pilot light
stops blinking. The pilot lights
7.1
and
7.2
illuminate to indicate that the appliance starts
operating and the door is locked.
To interrupt a programme which is running,
press the button
5
: the corresponding green
pilot light starts blinking.
To restart the programme from the point at
which it was interrupted, press the button
5
again
. If you have chosen a delayed start,
the machine will begin the countdown.
If an incorrect option is selected, the
red
pilot
light of the button
5
blinks for 3 times.
8
electrolux
