background image

to the appliance. This function remains ena-
bled also when the washing machine is not
working.
There are two different ways to set this op-
tion:
1. Before pressing button 

8

: it will be im-

possible to start the machine.

2. After pressing button 

8

: it will be im-

possible to change any other pro-
gramme or option.

To enable or disable this option press si-
multaneously for about 6 seconds buttons

5

 and 

6

 until on the display, the icon 

 ap-

pears or disappears.

DAILY USE

Load the laundry

Open the door by carefully pulling the door
handle outwards. Place the laundry in the
drum, one item at a time, shaking them out
as much as possible. Close the door.
Make sure that no laundry stays between
the seal and the door. There is a risk of wa-
ter leakage or damage to the laundry. 

Measure out the detergent and the fab-
ric softener

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent re-
quired, pour it into the main wash compart-
ment 

 or in the appropriate compartment

if the selected programme/option it requires
(see more details in «Detergent dispenser
drawer»).

If required, pour fabric softener into the
compartment marked 

 (the amount used

must not exceed the «MAX» mark in the
drawer). Close the drawer gently.

SELECT THE REQUIRED PROGRAMME
BY TURNING THE PROGRAMME
SELECTOR DIAL (1)

Turn the programme selector dial to the re-
quired programme. The washing machine
will propose a temperature and automati-
cally select the maximum spin value provi-
ded for the programme you have chosen.
You can change these values by operating
the corresponding buttons. The 

green

 pilot

light of the button 

8

 starts to flash.

The selector dial can be turned either clock-
wise or counterclockwise. Turn to position

 to reset programme/Switching the ma-

chine off.

At the end of the programme the selec-
tor dial must be turned to position 

 ,

to switch the machine off.

electrolux

Summary of Contents for EWF 129442 W





























Reviews: