31
Additional Rinse/RINSE+ (Spülen+, Rinçage+)
çage+)
The washing machine is set for extremely economi-
cal water consumption. However, for persons who
suffer from allergies, it can be helpful to rinse with
more water.
3
When this function is set, an additional rinse
is performed with the programs COTTONS/
LINEN (Koch-/Buntwäsche, Couleurs),
EASY-CARES (Pflegeleicht, Textiles
Melanges)/EASY IRON (Leichtbügeln, Fâcile
à Repasser) and DELICATES (Feinwäsche,
Délicat).
No additional rinse is set when the unit is
delivered.
Set Additional Rinse:
1.
Turn the program selector to SHORT SPIN
(Schonschleudern, Essorage Délicat).
2.
Keep the button SOAKING (Einweichen, Trem-
page) for at least 5 seconds.
After the button has been pressed for 5 seconds,
RINSE+ (Spülen+, Rinçage+) flashes on the pro-
gram sequence display for 5 seconds.
3.
While RINSE
+
(Spülen+, Rinçage+) is flashing,
release the button SOAKING (Einweichen, Trem-
page).
After the flashing stops, the additional rinse is set.
It is set until it is canceled again.
When the additional rinse is set, the indicator
RINSE
+
(Spülen+, Rinçage+) lights up on the pro-
gram sequence disply before the program start and
during the additional rinse.
4.
If you want to check whether the additional rinse
is set:
–
Turn the program selector to SHORT SPIN
(KORT CENTRIFUG., ESSOR. DELICAT).
–
Briefly press the button SOAKING (Ein-
weichen, Trempage).
The additional rinse is set if RINSE
+
(Spülen+,
Rinçage+) flashes on the program sequence
display.
Cancel Additional Rinse:
1.
Turn the program selector to SHORT SPIN
(Schonschleudern, Essorage Délicat).
2.
Keep the button SOAKING (Einweichen, Trem-
page) pressed for at least 5 seconds.
As soon as the button is pressed, RINSE
+
(Spülen+, Rinçage+) flashes on the program
sequence display. After 5 seconds, RINSE
+
(Spülen+, Rinçage+) stops flashing and lights up
constantly for a further 5 seconds.
3.
While RINSE
+
(Spülen+, Rinçage+) lights up con-
stantly, release the button SOAKING (Einweichen,
Trempage).
After RINSE
+
(Spülen+, Rinçage+) has stopped
lighting up, the additional rinse is cancelled.
3
An additional rinse increases water con-
sumption and the program run time.
Solution Cooling
It may be necessary to cool down the washing solu-
tion before pumping off in order to avoid thermal
damage to plastic drainage pipes.
3
The washing solution is cooled down at the
end of the main washing cycle before pump-
ing off (by incoming cold water).
(This setting is only effective for COTTONS/
LINEN (Koch-/Buntwäsche, Couleurs) at
temperatures of over 40 °C.)
No solution cooling is set when the unit is
delivered.
Set the Solution Cooling:
1.
Turn the program selector to SHORT SPIN
(Schonschleudern, Essorage Délicat).
2.
Keep the button PRE WASH (Vorwäsche, Prélav-
age) pressed for at least 5 seconds.
After the button has been pressed for 5 seconds,
MAIN WASH (Hauptwäsche, Lavage) flashes on
the program sequence display for 5 seconds.
3.
While MAIN WASH (Hauptwäsche, Lavage) is
flashing, release the button PRE WASH (Vor-
wäsche, Prélavage).
After the flashing has stopped, the solution cool-
ing is set. It is set until it is cancelled again.
4.
If you want to check whether the solution cooling
is set:
–
Turn the program selector to SHORT SPIN
(Schonschleudern, Essorage Délicat).
–
Briefly press the button PRE WASH (Vor-
wäsche, Prélavage).
If MAIN WASH (Hauptwäsche, Lavage) flashes
on the program sequence display, the solution
cooling is set.
Summary of Contents for EWF 1480
Page 1: ...W a s h i n g M a c h i n e User Information EWF 1480 822 943 373 01 13 11 02 01 g ...
Page 42: ...42 ...
Page 43: ...43 ...
Page 44: ...44 ...
