ENGLISH 9
3.11 Start/Pause Touchpad ( )
To start the selected program,
press the ‘Start/Pause’.
To interrupt a program which is
running, press the ‘Start/Pause’
to pause the machine.
To restart the program from the
point at which it was interrupted,
press the ‘Start/Pause’ again.
If you have chosen a delayed
start, after pressing ‘Start/Pause’
the machine will begin the
countdown.
3.12
Buzzer Sounds
The program is completed.
The appliance has a malfunction.
The buzzer sounds operate when:
If you want to disable the buzzer
sound (except for event of
appliance malfunction), press
“Rinse +” and “Vapour” touchpads
at the same time for 3 seconds,
and listen for “BEEP, BEEP”.
To return to default configuration
press these 2 touchpads at the
same time for 3 seconds, and listen
for “BEEP”.
Select this option to add approxi-
mately 45 minutes of tumbling in
vapour during the wash cycle.
Vapour helps open fabric fibers
up to allow laundry additives to
release tough stains.
3.10 Vapour Touchpad
The indicator of this option comes
on.
Vapour may not necessarily be
visible inside the drum during a
vapour wash cycle. Vapour is
created below the drum and
allowed to naturally rise into the
clothes.
NOTE:
At the end of the Vapour cycle
the clothes will be warmer,
softer and detached from the
drum.
If Vapour option is selected,
rinse temperatures will be
elevated.
During a vapour cycle you
may notice vapour exiting
from the drain hose of the
washing machine, this is
normal and there is no cause
for alarm.
Vapour may not be present
during the entire vapour wash
cycle.
Vapour function is more
effective with half load.
