29
Drain pump
The drain pump is maintenance-free. It is only necessary to open the pump
cover if there is a malfunction and water is no longer being pumped out, e.
g. if the pump wheel is blocked.
Please make sure before loading the washing that there are no foreign bod-
ies in the pockets or caught between the washing. Paperclips, nails, etc.
that may have got into the washing machine with the washing remain in the
pump housing (foreign body trap that protects the pump wheel).
1
Warning!
Before opening the pump cover, switch off the washing machine
and remove the mains plug from the socket.
1.
First carry out an emergency drain.
2.
Place a cloth on the floor in front of the drain pump cover.
Residual water runs out.
3.
Unscrew the pump cover in an anti-
clockwise direction and remove it.
4.
Remove foreign bodies and fluff from
the pump housing and from the pump
wheel.
5.
Check whether the pump wheel right at
the back of the pump housing can turn.
(It is normal for the pumping wheel to
turn jerkily.) If the pumping wheel can-
not be turned, please contact the Cus-
tomer Care Department.
6.
Insert the pump cover. Insert the
guides at the sides of the cover into the
guide slots and tighten the cover by
turning in a clockwise direction.
7.
Close off the emergency drain hose
and place it in the support.
8.
Close plinth flap.