Electrolux EWF7524CDWA, User Manual

deselect this option by pressing 

“Delay End” touchpad repeatedly till 

the display shows delay time “       ”;

14         www.electrolux.com 

Delay End (      ) Touchpad

Time Manager

This option allows you to adjust the wash 

time. Press this touchpad repeatedly to 

decrease or increase the wash time 

according to the soil level of your wash. 

Use the table below as a guide.

Select this option to add approximately 

30 minutes of tumbling in vapour during 

the wash cycle. Vapour helps open fabric 

fibers up to allow laundry additives to 

release tough stains. The indicator of this 

option will be on.

Vapour (     ) Touchpad

Vapour may not necessarily be visible 

inside the drum during a vapour wash 

cycle. Vapour is created below the 

drum and allowed to naturally rise into 

the clothes.

At the end of the Vapour cycle, the 

clothes will be warmer, softer and 

detached from the drum.

If Vapour option is selected, rinse 

temperatures will be elevated.
During a vapour cycle, you may notice 

vapour exiting from the drain hose of the 

washing machine, this is normal and 

there is no cause for alarm.

Vapour may not be present during the 

entire vapour wash cycle.
Vapour function is more effective with 

half load.

NOTE

●

●

●

●

Before you start the program, this option 

makes it possible to define the end of the 

washing program from minimum of 1 hour 

to maximum of 20 hours.

If program duration is longer than 

3 hours, minimum Delay End 

option starts from 4 hours.

Time Manager function is not 

available when 

is on.

After selecting Delay End time, press 

Start/Pause touchpad to start the 

program. Machine will then countdown 

and update time on the display every 

hours until it reaches the starting point of 

the wash cycle.

Press the Delay End touchpad to choose 

the end time as you wish. The display 

shows the number of hours and the 

indicator beside the touchpad is on. 

For example, if the program duration of 

your selected program is 3.20 hours and 

you define the “Delay End” time to 6 

hours. This means your wash program 

will finish in 6 hours. (See diagram)

3.20 hrs.

2.40 hrs.

Working Cycle

“Delay End” Time : 6 hrs.

Pressed 

Start/Pause

End of 

Cycle

Start the 

Program

Countdown

This option must be selected after 

choosing the wash program, and 

before pressing the “Start/Pause” 

touchpad. 

If you wish to modify or cancel Delay End 

option after starting the program, follow 

the steps below:

set the washing machine to PAUSE by 

pressing “Start/Pause” touchpad;

-

-

press the “Start/Pause” to start the 

program.

-

Soil Level

>>

Heavy

Medium

>>

Light