ENGLISH 13
3.6
Setting
●
●
●
●
Extra Rinse Option ( )
This option is recommended for people
who are allergic to detergents, and in
areas where the water is very soft. Use
this option to add two rinse phases to a
program.
To activate this option, press “Spin”
and “Option” touchpads at the same
time until the “Extra Rinse” ( ) LED
turn on.
To deactivate this option, press “Spin”
and “Option” touchpads at the same
time until the “Extra Rinse” ( ) LED
turn off.
Child Safety Lock Option ( )
Your appliance is provided with CHILD
SAFETY LOCK which permits you to
leave the appliance unsupervised with
the door closed without having to worry
that children might be injured by or cause
damage to the appliance.
To
activate
the function, press
“Temp” and “Spin” touchpads at the
same time until symbol “ ” (lock)
show on the display with sound.
To set “Child Lock” option:
This setting permits you to either enable
or disable the buzzer at the end of the
program. As an example, you might wish
to disable this buzzer when you start a
wash when going to bed, so that when
the wash finished approximately 1 hour
later, it will not disturb you through the
night.
Error warning beeps such as
critical faults are not disabled.
Enabling/Disabling
End-Of-Wash Buzzer
To
deactivate
the function, press
“Temp” and “Spin” touchpads at the
same time until symbol “ ” (unlock)
show on the display with sound.
This function remains enabled
even after the appliance is
switched off.
After active this function, if
you press any touchpad,
symbol “ ” will flash on
display along with buzzer
sound. (except “On/Off”
button)
●
●
To disable the buzzer sound, press
“Program” and “Temp” touchpads at
the same time for 3 seconds, and
listen for “BEEP, BEEP”.
To return to default configuration
press these 2 touchpads at the same
time for 3 seconds, and listen for
“BIP”.
This option remains enabled
even after the appliance is
switched off.
Set this option after pressing the
“Start/Pause ” touchpad.
