30 www.electrolux.com
7.
Remove the power supply cable and the
drain and inlet hoses from the hose
holders «B» on the rear of the appliance.
Loosen or tighten the feet to adjust
the level. A correct adjustment of the
appliance level prevents vibration,
noise and the movement of the
appliance when in operation.
11.2
Positioning
Use a spirit level on the top and
side of the washing machine to
check the levels.
If you do not have a spirit level, as a
guide use the edge of a door frame,
cupboard or bench to check that the
washing machine is leveled.
It is important that your washing
machine stands firm and leveled
on the floor to ensure correct
operation. The appliance must not
be installed behind a lockable
door, a sliding door or a door with
a hinge on the opposite side to
avoid restricting the washing
machine door.
8.
9.
Pull out the plastic spacers.
10.
Put the plastic caps in the holes. You can
find these caps in the user manual bag.
Remove the three transit bolts.