Electrolux EWF8024Q5WB, User Manual

19

18         www.electrolux.co.th 

Measure out the amount of 

detergent required, pour it into the 

main wash compartment      .

Do not use gelatinous or thick 

liquid detergents.
Do not put more liquid than the 

maximum level.

Do not set the “Delay End”.

Do not set the “Prewash” phase.

NOTE: When you use the 

liquid detergent

Pull out the dispenser drawer until 

it stops.

-

-

-

-
-

-

Measure out the detergent and the 

fabric softener;

2. 

If you wish to carry out the 

“Prewash” phase, pour it into the 

compartment marked      .  

If required, pour fabric softener into 

the compartment marked      .

-

Close the drawer gently.

-

-

Residues of detergent, softener 

and water may remain in the 

dispenser. It is recommended to 

clean the dispenser regularly to 

remove any residue.

The softener amount used must 

not exceed the “MAX” mark in the 

drawer.
If you use thick softeners it is 

recommended to dilute with water.

If you want your laundry to be spun or 

use temperature different from the one 

proposed by the washing machine, 

pess “Spin” and “Temp” touchpads 

repeatedly to change the spin speed 

and temperature.
Press the option touchpads, if you 

want your laundry to be washed with 

special functions. 

Different functions can be 

combined which is dependent on 

the program selected.
If an option is not compatible with 

the wash program selected, the 

symbol “          ” will flash on display 

along with buzzer sound.

If you want to adjust washing time, 

press the “Time Manager” touchpad 

repeatedly to increase or decrease 

washing time. (See Time Manager 

guide on page 13)
If you want to define the end of the 

washing program, press the “Delay 

End” touchpad repeatedly to choose 

your washing machine working time.

5.3 Options Setting

-

-

1.

2.

NOTE

NOTE

NOTE

19

ENGLISH

The appliance will automatically adjust 

the selected program duration 

according to the type and size of the 

load.

-

The display will show adjusted 

program duration.

-

To start a program, press the Start/Pause 

touchpad. The corresponding pilot light 

will stop flashing and a default program 

duration will be displayed on the screen.

5.4 Starting A Cycle (      )

After approx. 15 minutes from the start of 

a program:

If you press any touchpad while a 

program is operating, the symbol “         ” 

will flash on display along with buzzer 

sound. (except Start/Pause touchpad 

and On/Off button) 

To pause, press Start/ Pause. 

The indicator will start flashing.

-

Press the Start/Pause again. 

The program will continue.

-

Changing a running program 

is possible 

only by switching off

 the appliance.

Press the “On/Off” button to cancel 

the program and to turn off the 

appliance.

-

5.5 Interruption Of A Program

5.6 Changing A Program

It may be possible to change some of the 

options after a wash program has started.

Press the “On/Off” button again to 

start the appliance. 

-

5.7 Changing The Options

Press the touchpad Start/Pause. The 

indicator will start flashing.

1.

If available change the options that 

you wish.

2.

Press Start/Pause again. The program 

will continue.

3.

While a program or the Delay End is 

operating, the appliance door is locked 

and the display shows the indicator “       ”. 

First, set the machine to PAUSE by 

pressing the “Start/Pause” touchpad. Wait 

until the door lock indicator goes off, then 

the door can be opened. 
If the door lock indicator “        ” does not 

disappear, this means that the machine 

is already heating and the water level is 

above the bottom edge of the door or the 

drum is turning. In this case the door 

CAN NOT be opened. If you need to 

open it, you must drain the water to open 

the door.

In case of emergency please 

refer to “Emergency door 

opening” on page 32.

5.8 Opening The Door

NOTE

NOTE

Now you can set a new wash program 

and change any available options. Press 

Start/Pause to start the new program.

The appliance will not drain the water 

(except programs; Vapour Refresh, Spin, 

Rinse + Spin, Tub Clean).

The appliance stops automatically.
The acoustic signal will operate.
The display will show “          ”.
The indicator of the touchpad 

Start/Pause goes off.

-
-
-
-

-
-

-

-

The door lock indicator “        ” goes off.
Remove the laundry from the 

appliance. Make sure that the drum is 

empty.
Keep the door partly open, to prevent 

the mildew and odours.
Turn off the water tap.

5.9 At The End Of The Program