background image

12         www.electrolux.com 

1)

 Energy Saver program with 40degC and 1400rpm is recommended for a full load of 

normally soiled cottons, and is the Water and Energy rating label program.

Program;

Temperature

range

1200 

rpm

2 kg

1200 

rpm

4 kg

Type of load and soil level 

Max. 

Spin 

Speed

Max. Load 

(Dry 

Clothes)

Cold to 40°C 

Cold to 40°C 

Specially tested program for woollen garments 

bearing the “Pure new woollen, non-shrink, 

machine washable” label.

Delicates;

Wool        ;

Favourite

Recall you favourite program.

Delicate fabrics such as acrylics, viscose, polyester 

items. (Adjust wash time according to soil level. 

See Time Manager table on page 14)

Woolmark Apparel Care - Blue

The wool wash cycle of this machine has been approved by The 

Woolmark Company for the washing of wool garments labelled as 

“hand wash” provided that the garments are washed according

to the instructions issued by the manufacturer of this washing machine. 

Follow the garment care label for drying and other laundry instructions. 

M1361
The Woolmark symbol is a Certification mark in many countries.

Summary of Contents for EWF9043BDWA













































Reviews: