16
electrolux
use
The availability of these soil level icons
change according to the type of fabric
as shown in the following chart:
Altering an option or a running
programme
It is possible to change any option
before the programme carries it out.
Before you make any change, you
must pause the washing machine by
pressing the «Start/Pause» button.
(Only the Time Manager option cannot
be modified after the programme has
started.)
Changing a running programme is
possible
only by resetting it
. Turn the
programme selector dial to
O
and then
to the new programme position. Start
the new programme by depressing the
«Start/Pause» button again. The
washing water in the tub will not
emptied out.
Interrupting a programme
Depress the «Start/Pause» button to
interrupt a programme which is
running, the corresponding light starts
to flash. Depress the button again to
restart the programme.
Cancelling a programme
Turn the selector dial to
O
to cancel a
programme which is running. Now you
can select a new programme.
Opening the door after the
programme has started
First set the machine to pause by
pressing the «Start/Pause» button.
If the «Door locked»
icon
desappears on the display, the door
can be opened.
If the «Door locked»
light does not
goes off, this means that the machine
is already heating, that the water level
is above the bottom edge of the door
or that the drum is turning. In this case
the door can not be opened.
If you cannot open the door but you
need to open it you have to switch the
machine off by turning the selector dial
to
O
.
After about few minutes the door can
be opened
(pay attention to the
water level and temperature!)
.
Fabric
Soil Level
Cottons
90°C
X
X
X
X
X
X
60°C
X
X
X
X
X
X
40°C
X
X
X
X
X
X
50°C
X
X
X
X
X
X
30°C
X
X
X
X
X
X
(cold)
X
X
X
X
X
X
Synthetics
Delicates
60°C
X
X
X
X
50°C
X
X
X
X
40°C
X
X
X
X
40°C
X
X
X
X
30°C
X
X
X
X
30°C
X
X
X
X
(cold)
X
X
X
X
(cold)
X
X
X
X
132973570 EN.qxd 07/05/2007 13.50 Pagina 16