Reduce the spin speed by pressing
button 2
When the required programme has been se-
lected, your appliance automatically propo-
ses the maximum spin speed provided for
that programme.
Press button
2
repeatedly to change the
spin speed, if you want your laundry to be
spun at a speed different from the one pro-
posed by the washing machine. The rele-
vant light will light up.
Select the available options by
pressing buttons 2 and 3
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired pro-
gramme and before starting the pro-
gramme. When these buttons are pressed,
the corresponding pilot lights illuminate.
When they are pressed again, the pilot
lights go out. If an incorrect option is selec-
ted, the integrated
red
pilot light of the but-
ton
6
flashes 3 times and the message
Err
is displayed on the display to indicate a
wrong selection.
For the compatibility among the wash-
ing programmes and the options see
chapter «Washing Programmes».
Interrupt, if needed, the hot water
connection by pressing the button 4
Press this button to interrupt the hot water
loading, if you have selected one of the pro-
grammes indicated by the corresponding
symbol. The machine will only load then
cold water, which will be warmed up by the
heating element of the appliance. The corre-
sponding pilot light illuminates.
For the compatibility among the wash-
ing programmes and the options see
chapter «Washing Programmes».
Select the Delay Start by pressing
button 7
Before you start the programme, if you wish
to delay the start, press the button
7
repeat-
edly, to select the desired delay. The selec-
ted delay time value (up to 20 hours) will ap-
pear on the display a few seconds, then the
duration of the programme will appear again.
You must select this option after you have
set the programme and before you press
button
6
.
You can cancel or modify the delay time at
any moment, before you press button
6
.
Selecting the delayed start:
1. Select the programme and the required
options.
2. Select the delay start by pressing the but-
ton
7
.
3. Press button
6
:
– the machine starts its hourly count-
down.
– The programme will start after the se-
lected delay has expired.
Cancelling the delayed start after having
pressed button
6
:
1. Set the washing machine to PAUSE by
pressing button
6
.
2. Press button
7
once until the value
’
is displayed
3. Press button
6
again to start the pro-
gramme.
Important!
The selected delay can be
changed only after selecting the washing
programme again.
The Delay Start
can not
be selected with
the
DRAIN
programme.
Start the programme by pressing
button 6
To start the selected programme, press the
button
6
, the corresponding green pilot
light stops blinking. The pilot lights
8.1
and
8.2
illuminate to indicate that the appliance
starts operating and the door is locked.
To interrupt a programme which is running,
press the button
6
: the corresponding
green pilot light starts blinking.
To restart the programme from the point at
which it was interrupted, press the button
6
again
. If you have chosen a delayed start,
the machine will begin the countdown.
If an incorrect option is selected, the
red
pi-
lot light of the button
6
blinks for 3 times
the message
Err
is displayed for a few sec-
onds.
Altering an option or a running
programme
It is possible to change some options be-
fore the programme carries them out.
10
electrolux
