Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the ma-
chine is not impeded by carpets, rugs etc.
Check that the machine does not touch the
wall or other kitchen units. Level the wash-
ing machine by raising or lowering the feet.
The feet may be tight to adjust as they incor-
porate a self locking nut, but the machine
MUST
be level and stable. If necessary,
check the setting with a spirit level. Any nec-
essary adjustment can be made with a span-
ner. Accurate levelling prevents vibration,
noise and displacement of the machine dur-
ing operation.
Caution!
Never place cardboard,
wood or similar materials under the
machine to compensate for any
unevenness in the floor.
Water inlet
The inlet hoses are supplied with the appli-
ance and can be found inside the machine
drum.
Do not use the hoses from your previ-
ous machine to connect to the water
supply.
1. Connect the hoses with the angled con-
nection to the machine. The hot water
hose is provided with a red nut and
must be linked on the right side. (See
the illustrated instructions supplied with
the label hanged on the back of the ap-
pliance).
Caution!
Do not place the inlet hoses down-
wards. Angle the hoses to the left or
right depending on the position of
your water taps.
45°
35°
electrolux
25