Electrolux EWL 105415 W, User Manual

Unpacking

1

2

3

4

Untying

2

3

a

1b

1a

1b

2a

2b

x2

3

4

To install your washing machine at the
same level as surrounding furniture, pro-
ceed as shown on picture 4.

Water supply

Install the supplied water inlet hoses at the
rear of your washing machine by making

them pass in the throat planned for that
purpose. Do not reuse an old hose.

Warning!

 The hot water hose is

provided with a red nut and must be
linked to the tip equipped with a red
disk. Connect the hose for hot water to
the hot water tap. If there is no tap for
hot water, connect only the cold water
hose.

The water inlet hoses can not be extended.
If they are too short, please contact the af-
ter-sales service.

1

2

Open the water inlet taps. Check there are
no leaks.

Drainage

Fit the U-piece on
the drainage hose.
Place everything in a
drainage point (or in
a sink) at a height of
between 70 and 100
cm. Ensure it is posi-
tioned securely. Air
must be able to en-
ter the end of the
hose, to avoid any risk of siphoning.
The drain hose must never be stretched. If
it is too short, contact an engineer.

Electrical connection

This washing machine must only be con-
nected in single-phased 230 V. Check the
fuse size: 13 A for 230 V. The appliance
must not be connected with an extension
lead or multi-plug adaptor. Ensure that the
plug is earthed and that it is in accordance
with current regulations.

Positioning

Position the appliance on a flat and hard
surface in a ventilated location. Ensure the
appliance does not come into contact with
the wall or other furniture.

MINI 70 cm

MAXI 100 cm

electrolux 

11