SOI/DT 2002-07 eb
13
599 35 36-69
•
Rinse hold:
→
Stops the appliance with water in the tub before the final spin.
→
To drain the water, reset the programme and then select a drain or spin cycle.
•
Reduced spin speed:
→
Reduces the speed of all spins as shown in the table:
Maximum spin speed (rpm)
600
700
800 900 1000
Reduced speed for COTTON (rpm)
450
450
450 450 500
Reduced speed for ALL OTHER CYCLES (rpm)
450
450
450 450 450
•
No spin:
→
Eliminates all spin phases.
→
In COTTON cycles, adds three rinses.
→
In SYNTHETICS cycles, adds one rinse.
•
Delayed-start time:
→
Adds a pause before the start of the programme. The delay time is shown by the corresponding LEDs.
→
To start the cycle immediately, after having selected a delayed start:
-
press START/PAUSE, cancel the delay time by pressing the appropriate button, and then press
START/PAUSE again.
Examples of delay time
buttons
4.3.1 Temperature adjustment:
→
Enables to select the washing temperature according to the limit
temperature of the cycle.
→
Can be used during the cycle selection phase: the temperature
can be modified only if the heating phase has not started (in
pause mode).