Guide to diagnostics of electronic controls EWM10931
2011 SOE/DT-mdm FCPD-dp Quality-tb
62/75
599 73 77-37
Checks to perform:
Checks to perform:
Checks to perform:
Checks to perform:
Checks to perform:
E92: protocol incongruence
E92
Inconsistency between configuration values on starting the appliance
E92
E93: Appliance configuration error
E93
Inconsistency between configuration values on starting the appliance
E93
E94: Incorrect configuration of washing cycle
E94
Inconsistency between configuration values on starting the appliance
E94
E97: Inconsistency between control selector version
and configuration data
E97
Discrepancy between programme configuration data and selector recognition data
E97
E98: Communication error between main PCB and Inverter board
E98
Incompatibility between the main circuit board and the Inverter board
E98
Incorrect configuration possible.
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
Incorrect configuration possible.
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
Incorrect configuration possible.
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
Incorrect configuration possible.
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
Check that all the connectors are correctly inserted
!
Check that all the connectors are correctly inserted
!
Check that all the connectors are correctly inserted
!
Check that all the connectors are correctly inserted
!
If there are burns on the circuit
board, see page 73
!
Check that all the connectors are correctly inserted
!
Incorrect configuration possible.
Replace the main circuit board/Inverter board and repeat the diagnostic cycle to check
for any further alarms.