Guide to diagnostics of electronic controls EWM10931
2011 SOE/DT-mdm FCPD-dp Quality-tb
63/75
599 73 77-37
Checks to perform:
Checks to perform:
E9C
E9C: Display board configuration error
E9C
E9E
E9E: Display board sensor/touch key faulty
E9E
Incorrect configuration possible.
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
Check that all the connectors are correctly inserted
!
Check that all the connectors are correctly inserted
!
Display board faulty.
Replace the display board and repeat the diagnostic cycle to check for any further alarms.
If there are burns on the circuit
board, see page 73
!